Samsung NX500 - Page 180

179
Camera settings menu > Setting
* Default
Item Description
HDMI Output
When you connect the camera to an HDMI-supported TV
with an HDMI cable, you can change the resolution of the
image.
 NTSC: Auto*, 1920 X 1080p, 1280 X 720p, 720 X 480p,
720 X 576p (activates only when PAL is selected)
File Name
Set the method of creating le names.
 Standard*: SAM_XXXX.JPG (sRGB)/
_SAMXXXX.JPG (Adobe RGB)
 Date:
- sRGB les - MMDDXXXX.JPG. For example, for a photo
captured on Jan. 01, the le name would be
0101XXXX.jpg.
- Adobe RGB les - _MDDXXXX.JPG for the months Jan
through Sept. For the months Oct through Dec, the month
number is replaced by the letters A (Oct.), B (Nov.), and
C (Dec.).
For example, for a photo captured on Feb. 03, the le
name would be _203XXXX.jpg. For a photo captured on
Oct. 05, the le name would be _A05XXXX.jpg.
* Default
Item Description
File Number
Set the method of numbering les and folders.
 Reset: After using the reset function, the next le name is
started at 0001.
 Series*: New le numbers continue the existing number
sequence, even if you have installed a new memory card,
formatted the card, or deleted all photos.
 The rst folder name is 100PHOTO. If you have selected
the sRGB color space and Standard le naming, the rst
le name is SAM_0001.
 File name numbers are increased by 1 from SAM_0001 to
SAM_9999.
 Folder numbers are increased by 1 from 100PHOTO to
999PHOTO.
 The maximum number of les that can be saved in one
folder is 9,999.
 File numbers are assigned according to DCF (Design rule
for Camera File system) specications.
 If you change a le name (for example, on a computer),
the camera will not be able to play the le.
Folder Type
Set the type of folder.
 Standard*: XXXPHOTO
 Date: XXX_MMDD