181
Camera settings menu > Setting
* Default
Item Description
Reset
Camera Menu*: Return the setup menu and shooting
options to the factory defaults.
Key Mapping: Return the custom button functions to the
factory defaults.
C Mode: Return the T mode settings to the factory
defaults.
Bluetooth/Wi-Fi: Return the connection history, ID, and
password of the Bluetooth and Wi-Fi functions to the
factory defaults.
All: Return all settings to the factory defaults. (Date, time,
language, and video output settings will not change.)
* Default
Item Description
Device
Information
View the rmware version of the body and the lens,
the Wi-Fi MAC address, and Bluetooth MAC address, or
update the rmware.
Software Update: Update the rmware of the camera
body or lens, or download the rmware via Wi-Fi.
(Body Firmware, Lens Firmware, Download via Wi-Fi)
You can update the rmware by connecting the camera
to a computer and starting i-Launcher. For more details,
refer to page 200.
You cannot run a rmware update without a fully
charged battery. Recharge the battery fully before
running a rmware update.
If you update the rmware, user settings and values will
be reset. (Date, time, language, and video out will not
change.)
Do not turn the camera o while the update is in
progress.
Remaining storage on the memory card must be more
than 1 GB to update the rmware via Wi-Fi.
The process of updating rmware via Wi-Fi may not
be stable depending on the quality of the network
connection.
Open Source
License
View open source licenses.
To Next Page
Loading...
