Installing the Phone DS/ITP-5012L Phone User Guide
4
3.
Connect the LAN cable from the PC’s network card to the PC connec-
tion jack.
4.
Connect the power adapter to the power adapter jack. (Do not connect
the power adapter to the mains outlet yet, or if you do, ensure that the
power is not switched on.)
5. Connect any recording device to the recording device jack (REC.) (The
recording device can record phone conversations.)
Using the Phone Stand
If the phone is to stand on a desk, insert the phone stand into the two side
holes located on the base and slide it upward, as shown.
Now skip to the section Configuring the IP Phone to configure the working
environment for your phone.
To Next Page
Loading...
