Configuring the IP Phone DS/ITP-5012L Phone User Guide
10
Configuring the IP Phone
This section describes the procedure for setting the ‘user environment’ after
installing your ITP-5012L IP phone. You also need to do this if the phone sys-
tem to which your phone is connected has been changed or re-initialised,
Before beginning the procedure, make sure the power to the phone has
been switched off
.
1. Entering the Environment Setup Mode
Press and hold down the [Menu] button
and turn on the power to the phone.
The environment setup menu appears on the LCD screen.
To Next Page
Loading...
