Samsung OfficeServ DS-5012L - Enbloc Timeout

Navigation Menus DS/ITP-5012L Phone User Guide
171
Press the [Menu] button and use the direction buttons to select
Æ [4. Status Info]
Then, press the [Enter] button.
The status information is displayed.
Enbloc Timeout
Allows you to select a valid time for the interval between entering a
phone number and pressing the [Send] button when the dial mode of the
phone is set to ‘Enbloc’. Valid times are 30 seconds, 1 minute or 3 min-
utes. When you subsequently enter a number to make a call, you must
press [Send] before this time expires, otherwise the number is cancelled
and you will need to re-enter it.
1. Press the [Menu] button and use the direction buttons to select
Æ [5. Enbloc Timeout]
Then, press the [Enter] button.