Handling Calls DS/ITP-5012L Phone User Guide
85
1. Press the [Conference] button in
standby mode.
2.
Press the left [Selection] button for
a number entry field and enter a
phone number to conference, then
press the [Enter] button.
Enter all numbers to conference
(up to four) in the same way.
Confirm each number by pressing the right [Selection] button for the
entry field. Press the button again if you want to cancel an entry.
3. Press the [Selection] button for
[Send All].
The conference connection status
of all the numbers is displayed.
z To delete a number from the conference,
press the [Selection] button for [Delete]
to the right of the number.
You can also dial the conference function code [4][6] to set up a
conference. (The procedure is as described in the user guide for 2-line
LCD phones.)
NOTE
To Next Page
Loading...
