100 Section 2H. microSD Card
3.
Locate the microSD card slot on the side of the
phone.
4. With the gold contact pins facing downward,
carefully insert the microSD card into the opening
and firmly push it in until you hear a click
indicating the card is securely installed (3).
5. Replace the cover by lining up the tabs and then
firmly pressing the cover down until it snaps into
place. Check that the battery is still properly
installed before turning on the phone.
Removing the microSD Card
1. Repeat steps 1 - 3 from “Inserting the microSD
Card” on page 99.
2. Firmly press the card into the slot and release (it
should pop partially out of the slot).
3. Remove the card from the slot.
4. Replace the cover by lining up the tabs and then
firmly pressing the cover down until it snaps into
place. Check that the battery is still properly
installed before turning on the phone.
Note
Be sure to use only recommended microSD cards
(up to 16GB). Using non-recommended microSD
cards could cause data loss and damage your
phone.
Note
DO NOT remove a microSD card while files are being
accessed or transferred. Doing so will result in loss or
damage of data.
Make sure your battery is fully charged before using
the microSD card. Your data may become damaged
or unusable if the battery runs out while using the
microSD card.
Boost M540.book Page 100 Wednesday, March 24, 2010 4:48 PM
To Next Page
Loading...
