54 Section 2C. Settings
3.
Use the navigation key to select Use Ringtone
Volume (to use the ringtone volume setting).
– or –
Use the navigation key to select
Separate Volume
(to use a volume setting that is different from the
ringtone volume setting).
4. If you select Separate Volume, press Vibrate
(left softkey) if you wish the phone to always vibrate
in addition to ringing at the selected volume
setting.
5. Press to store your new settings.
Vibrate All
The Vibrate All option allows you to mute all sounds
and activate the vibration feature for all activities without
turning your phone off.
To activate Vibrate All:
䊳 Press and hold the volume button down in standby
mode until the screen displays “Vibrate All.”
To deactivate Vibrate All:
䊳 Press the volume button up repeatedly to select a
volume level.
Silence All
The Silence All option allows you to mute all sounds
without turning your phone off.
To activate Silence All:
䊳 Press and hold the volume button down in standby
mode until the screen displays “Silence All.”
To deactivate Silence All:
䊳 Press the volume button up repeatedly to select a
volume level.
Alert Notification
Set your phone to alert you with an audible tone when
you change service areas, once a minute during a
voice call, or when a call has been connected.
1. Highlight and press > Settings/Tools >
Settings > Sounds > Alerts.
Note
Repeat these same processes to adjust the
Applications > Volume and Game Vibration settings.
Boost M540.book Page 54 Wednesday, March 24, 2010 4:48 PM
To Next Page
Loading...
