Samsung SCX-6555N - Page 173

Alignment & Troubleshooting
Service Manual
4-73
Samsung Electronics
◆
Copier Test Routines Table
1) Cover
Code Displayed Name Meaning
State
Displayed
01-100 Side Cover Interlock Detect if the Front Cover/Side Cover is open or closed. Opened[Closed]
01-200 Exit Cover Present Sensor Detect when Exit Cover is in place. Install[Not Install]
2) Motor
Code Displayed Name Meaning
State
Displayed
04-100 Main BLDC Motor Main BLDC Motor On/Off On[Off]
04-110 Main BLDC Motor Ready Detects if Main BLDC motor runs at normal speed. High[Low]
04-200 Exit Motor Forward Fast Exit Motor Forward Fast On/Off On[Off]
04-210 Exit Motor Forward Slow Exit Motor Forward Slow On/Off On[Off]
04-300 Duplex Motor Forward Duplex Motor Forward On/Off On[Off]
04-310 Duplex Motor Backward Duplex Motor Backward On/Off On[Off]
04-400 Duplex Fan1,2 Run Start/Stop Duplex Fan1,2 run On[Off]
04-410 Duplex Fan1 Run Ready Detects if Duplex Fan1 runs at normal speed. High[Low]
04-510 T1 Elevating Motor T1 Elevate Motor On/Off On[Off]
04-520 T2 Elevating Motor T2 Elevate Motor On/Off (Optional) On[Off]
04-530 T3 Elevating Motor T3 Elevate Motor On/Off (Optional) On[Off]
04-540 T4 Elevating Motor T4 Elevate Motor On/Off (Optional) On[Off]
3) DADF
Code Displayed Name Meaning
State
Displayed
05-100 DADF Doc. Detect Sensor Documemt Detect Sensor High[Low]
05-110 DADF Paper Width Sensor Paper Width Sensor High[Low]
05-120 DADF Paper Length Sensor Paper Length Sensor High[Low]
05-130 DADF Registration Sensor Doc. Registration Sensor High[Low]
05-140 DADF Scan Sensor Doc. Scan Start Sensor High[Low]
05-150 DADF Gate Sensor Doc. Gate Sensor High[Low]
05-160 DADF Door Open Sensor DADF Door Open Switch High[Low]
05-170 DADF Duplex Sensor Doc. Duplex[or Exit] Sensor High[Low]
05-180 DADF Exit Open Sensor DADF Exit Door Open Sensor High[Low]
05-200 DADF Scan Motor Forward Scan Motor Forward Run On/Off On[Off]
05-210 DADF Duplex Motor
Forward
Duplex Motor Forward Run On/Off On[Off]
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA