Samsung SCX-6555N - Page 174

Alignment & Troubleshooting
Service Manual
4-74
Samsung Electronics
Code Displayed Name Meaning
State
Displayed
05-220 DADF Duplex Motor
Backward
Duplex Motor Forward Backward On/Off On[Off]
05-300 DADF Pick-Up Solenoid Doc Pick-Up Solenoid On[Off]
05-310 DADF Regi. Solenoid Doc Regi. Solenoid On[Off]
05-400 Platen Cover Switch Platen Cover Open/Close Switch High[Low]
4) LSU
Code Displayed Name Meaning
State
Displayed
06-100 LSU Motor Run LSU Motor On/Off On[Off]
06-110 LSU Motor Ready Detects if LSU motor runs at normal speed. High[Low]
06-200 LSU LD Power LSU LD 1/2 Power On/Off On[Off]
06-300 LSU Fan Run Start/Stop LSU Fan Run On[Off]
5) Tray Sensor
Code Displayed Name Meaning
State
Displayed
07-100 Tray1 Home Position Detect when tray1 is closed. Closed[Opened]
07-110 T1 Paper Empty Sensor Detect when paper is in Tray1. High[low]
07-120 T1 size1 sensor Detects whether auto size1 sensor of tray1 is high or low. High[low]
07-130 T1 size2 sensor Detects whether auto size2 sensor of tray1 is high or low. High[low]
07-140 T1 size3 sensor Detects whether auto size3 sensor of tray1 is high or low. High[low]
07-150 T1 Stack Height Sensor Detects if paper in tray1 is elevated to the sensor. High[low]
07-160 T1 Paper Low Sensor Detects when the stack height of tray1 is less than 25%. High[low]
07-200 Tray2 Home Position Detect when tray2 is closed. Closed[Opened]
07-210 T2 Paper Empty Sensor Detect when paper is in Tray2. (Optional) High[low]
07-220 T2 size1 sensor Detects whether auto size1 sensor of tray2 is high or low.
(optional)
High[low]
07-230 T2 size2 sensor Detects whether auto size2 sensor of tray2 is high or low.
(optional)
High[low]
07-240 T2 size3 sensor Detects whether auto size3 sensor of tray2 is high or low.
(optional)
High[low]
07-250 T2 Stack Height Sensor Detects if paper in tray2 is elevated to the sensor.
(Optional)
High[low]
07-260 T2 Paper Low Sensor Detects when the stack height of tray2 is less than 25%.
(Optional)
High[low]
07-300 Tray3 Home Position Detect when tray3 is closed. Closed[Opened]
07-310 T3 Paper Empty Sensor Detect when paper is in Tray3. (Optional) High[low]
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA