- 91 -
Viewing UHD videos
Settings General External Device Manager HDMI UHD Color Try Now
If an external UHD player is connected to the TV, use the HDMI UHD Color function to convert the TV's HDMI
connector to a mode optimized for the UHD 50P/60P signals.
" When you select the HDMI connector you want to use for HDMI UHD Color, and then press the Select button to set the
HDMI UHD Color function to On, the TV screen flickers.
" The HDMI connection with HDMI UHD Color set to Off supports up to UHD 50P/60P 4:2:0 input signals, while the
HDMI connection with HDMI UHD Color set to On supports up to UHD 50P/60P 4:4:4 and 4:2:2 input signals. For more
information, refer to "Supported Resolutions for UHD Input Signals."
" When you connect the TV to an external device that supports only the UHD 24 or 30 Hz frequency or any FHD frequency, the
HDMI UHD Color function may not be available. In this case, set HDMI UHD Color to Off.
Using HDMI black level
Settings General External Device Manager HDMI Black Level Try Now
Use HDMI Black Level to adjust the black level to compensate for low black levels, low contrast, or dull colors
generated by external devices connected to the TV via an HDMI cable.
" This function is only available when the input signal connected to the TV via an HDMI connector is set to RGB444.
To Next Page
Loading...
Need help?
General
