- 23 -
Resetting Your Network
Settings General Network Reset Network Try Now
Restore the network settings to the factory default.
Turning on the TV with a mobile device
Settings General Network Expert Settings Power On with Mobile
You can turn on the TV with your mobile device when both of them are connected to the same network.
Connecting an IP control device to the TV
Settings General Network Expert Settings IP Remote
You can connect an IP control device to the TV remotely to manage your IP device.
" To use this function, Power On with Mobile must be turned on.
" Turning this feature on may allow other IP control devices to control your TV. We recommend turning this feature on only
if an authorized third-party custom controller is installed and configured specifically for a Samsung TV and if your Wi-Fi
network is password protected.
" This function may not be supported depending on the model or geographical area.
Setting up an Internet connection over IPv6
Configuring the IPv6 connection settings
Settings General Network Expert Settings IPv6
" This function may not be supported depending on the model or geographical area.
Checking the Internet connection set up over IPv6
Settings General Network Expert Settings IPv6 Status
" This function may not be supported depending on the model or geographical area.
Changing the name of the TV on a network
Settings General System Manager Device Name Try Now
You can change the name of the TV on the network. Select User Input at the bottom of the list and change the name.
To Next Page
Loading...
Need help?
General
