11
No. Name Function
10 EXTERNAL
HDD4
A blue indicator means that an external HDD is connected to the
rear eSATA Port4 and functioning normally. A red indicator means
that External HDD4 is not functioning properly.
11 REC A red indicator means that the product is in recording mode.
12 ALARM A blue indicator means that an event in Input Group has occurred.
13 ERROR A red indicator means that the product is not functioning properly.
14 RAID A blue indicator means that the product is running in RAID mode.
15 LINK/ACT1 A blinking blue indicator means that a network cable is properly
connected to the Monitor Ethernet Port, and data communication is
taking place properly.
16 LINK/ACT2 A blinking blue indicator means that a network cable is properly
connected to the Source Ethernet Port, and data communication is
taking place properly.
17 LINK/ACT3 A blinking blue indicator means that a network cable is properly
connected to the Storage Ethernet Port, and data communication is
taking place properly.
18 POWER A red indicator means that the product is powered on.
19 Config Ethernet
Port
Used to connect the product to a computer for the system
configuration.
20 LCD Panel The panel displays the current status of the product; it can also be
used to change the system configuration with the adjacent buttons.
21 ESC Button This button is used to change the system configuration. 'Chapter 5
LCD Setup' covers its use in detail.
22 Direction Button
Enter Button
This button is used to change the system configuration. 'Chapter 5
LCD Setup' covers its use in detail.
To Next Page
Loading...
