Samsung SRN-6450 - Connecting to the Website; Connecting Cable; Adding an IP Address

26
3.2. Connecting to the Website
3.2.1. Connecting Cable
Press PUSH on the front panel to open the Locking Door, then connect a PC to the Front
Panel Network Port with the supplied crossover cable as shown in the illustration below. (When
using a hub to connect the product to a computer, you may use a normal LAN cable instead of
a cross-over cable.)
3.2.2. Adding an IP Address
In your computer, click Start > Control Panel > Network Connections > Local Area Connection
> Properties.
.
Select Internet Protocol (TCP/IP.) Click the Properties button then in the Internet Protocol
(TCP/IP) Settings dialog, click the Advanced button to open the Advanced TCP/IP Settings