12
2.2. Back Panel
No. Name Function
1 AC IN Used to connect the product power cable.
2 SMPS FAN This fan cools the power supply.
3 DC FAN This fan cools the inside of the product.
4 Monitor Ethernet Port A network port that allows the product to connect to a PC to
run Web Viewer.
5 USB Port Used to upgrade the firmware version of the product.
6 Power Button Turns on or off the product.
7 Source Ethernet Port A network port that connects the product to the video camera.
8 SENSOR IN
/ RELAY OUT
Used to connect a sensor or alarm.
9 GROUND A terminal that is used to ground the frame to an external
device.
10 Storage Ethernet Port Used to connect NAS (Network Attached Storage) within the
same network.
11 eSATA Port1 Used to connect an external HDD.
12 eSATA Port2 Used to connect an external HDD.
13 eSATA Port3 Used to connect an external HDD.
14 eSATA Port4 Used to connect an external HDD.
15 RS232C Port Unused terminal.
To Next Page
Loading...
