Samsung SRN-6450 - Formatting All External Hdds

93
1. Select 1. Individual HDD, and then press Enter.
Use ∧ and ∨ to select the number for the external HDD bay containing the HDD to format,
and then press Enter.
Upon pressing Enter, the following messages appear while the selected HDD is being
formatted. To move back to the previous phase, press ESC. To cancel formatting and move
back to the main screen, hold down ESC for 2 seconds or longer.
When selecting an HDD that is not available or connected, the following message appears.
5.5.4. Formatting All External HDDs
Under HDD Format, select 2. External HDD, and then press Enter.
Use ∧ and ∨ to select the number for the external HDD bay containing the HDD to format,
and then press Enter.
2. Select All HDD in Bay[#], and then press Enter.
External Bay[1]
is not connected!!
External Bay[1]
is not connected!!
HDD Format
[DONE]
Formatting HDD
is in Pro
g
ress...
Format Bay[1]?
Yes: Enter No: Esc
1. Individual HDD
2. All HDD in Bay[1]
Bay Number to format
External Bay [1]
Format HDD [1]?
Yes: Enter No: Esc
HDD Number to format
Internal HDD? [1]