10
Chapter 2. Part Names
2.1. Front Panel
No. Name Function
1 Key Lock Turning the key completely engages the lock, so the buttons on the
front panel cannot be accessed and the HDD bay door cannot be
opened.
2 SATA-Bracket Mounts hard disks for storing recorded video. Up to four hard disks
can be mounted. Mounted HDDs are referred to as Internal HDD1
(upper left), Internal HDD2 (upper right), Internal HDD3 (lower left),
and Internal HDD4 (lower right.)
3 Internal HDD1 A blue indicator means that Internal HDD1 is installed and
functioning normally. A red indicator means that Internal HDD1 is not
functioning properly.
4 Internal HDD2 A blue indicator means that Internal HDD2 is installed and
functioning normally. A red indicator means that Internal HDD2 is not
functioning properly.
5 Internal HDD3 A blue indicator means that Internal HDD3 is installed and
functioning normally. A red indicator means that Internal HDD3 is not
functioning properly.
6 Internal HDD4 A blue indicator means that Internal HDD4 is installed and
functioning normally. A red indicator means that Internal HDD4 is not
functioning properly.
7 EXTERNAL
HDD1
A blue indicator means that an external HDD is connected to the
rear eSATA Port1 and functioning normally. A red indicator means
that External HDD1 is not functioning properly.
8 EXTERNAL
HDD2
A blue indicator means that an external HDD is connected to the
rear eSATA Port2 and functioning normally. A red indicator means
that External HDD2 is not functioning properly.
9 EXTERNAL
HDD3
A blue indicator means that an external HDD is connected to the
rear eSATA Port3 and functioning normally. A red indicator means
that External HDD3 is not functioning properly.
To Next Page
Loading...
