110 2G. Ser vices
䢇 Open <Menu> to jump directly to menu items or
applications. (See “Opening Menus With Voice
Dialer” on page 111.)
Calling a Contact With Voice Dialer
1. Press and tap > (Voice Dialer).
2. When you see “Listening,” say “Call” followed by
the name and the label for the contact you wish to
call. For example, say “
Call John Smith Mobile.” The
device displays the name it understands on the
screen.
䡲 If the location is not recognized or the name does
not have a phone number stored in Contacts, you
will see an onscreen list of possible options.
䡲 If a name has only a single number, or if you
know the name but are not sure which number to
call, say “
Call” followed by the name only. For
example, say “
Call John.”
● If the name is recognized and there is only
one phone number for the name. Tap OK to
dial the number.
● If there are multiple numbers, a list displays;
tap a number to place the call.
Calling a Phone Number With Voice Dialer
1. Press and tap > (Voice Dialer).
2. When you see “Listening,” say “Dial” followed
immediately by a valid string of digits to dial, for
example, say “
555 555 5555.”
Speak naturally and clearly and remember to speak
one digit at a time—1-800 should be pronounced “One
Eight Zero Zero.”
Tip: Use Voice Dialer in a quiet environment so it can
accurately recognize your commands.
SPH-M930_Boost.book Page 110 Friday, September 2, 2011 11:04 AM
To Next Page
Loading...
