SAMWONTECH
4st Edition of TEMI2000_Series IM : Aug. 18. 2009 Page 14 / 55
3.2.5 FIX operation STOP screen
▶ Once the operation has completed normally as the time at ‘TIME OPERATION’ on [4. FUNCTION & FIX
OPERATION setting], FIX operation will stop and ‘TIME OPERATION END’ message appears shown as
[Figure3-8]
▶ However, this message will not appear if the operation is stopped by force pressing ‘STOP’ button.
▶ That message will disappear with pressing any part of touch screen.
☞ This also applies to PROGRAM STOP.
[Figure 3-8] FIX Operations STOP screen
To Next Page
Loading...
