SAMWONTECH
4st Edition of TEMI2000_Series IM : Aug. 18. 2009 Page 25 / 55
5. PROGRAM SETTING
▶ Press [PROGRAM SET] on MAIN MENU screen to enter into program setting section [Figure 5-1
PROGRAM SET screen].
▶ This PROGRAM SET menu is composed with 6 groups concerned program operation setting.
No. Instructions Description
① PATTERN SET Pattern / Segment setting group.
② REPEAT SET Pattern / Segment repeat operation setting group
③ FILE EDIT Pattern editing by copy and delete.
④ TIME SIGNAL TIME SIGNAL setting group
⑤ WAIT SET Group to set WAIT function settings
⑥ PATTERN NAME Group to input the name of each pattern.
[Figure 5-1] PROGRAM SET screen
④
③
⑥
②
⑤
①
To Next Page
Loading...
Need help?
General
