Sandstrom SF-DABA18 - DAB Radio Operation; Automatic DAB Station Scan

DAB Operation
If the unit is connected to the mains power for the rst time, the unit will
show “Welcome to Digital Radio“ and then “00:00”. Press STANDBY/MUTE
button to switch on the unit and perform auto scan. During the scan the
display will show “Scanning…” together with a slide bar that indicates the
progress of the scan and the number of stations that have been found so
far.
Once the scan has nished, the unit will select the rst alphanumerically
found station. To explore the found stations, press the
button and
then press the –VOLUME+/SELECT/SNOOZE dial to conrm selection.
The clock will be updated automatically if you can receive DAB/
FM signal in your location. In order to synchronize to the current
local time, you must leave it on the DAB/FM station for a period
of time.
Auto Scan
The auto scan will search for all DAB Band III channels. After the scan has
nished, the rst alphanumerically found station will be automatically
selected.
1. In ON mode, press and hold the INFO/MENU button, and then turn the
–VOLUME+/SELECT/SNOOZE dial or press the
button to select
<Full scan>. Press the –VOLUME+/SELECT/SNOOZE dial to conrm.
2. The display will show “Scanning…” that indicates the progress of the
scan and the amount of stations that have been found so far.
3. Once the scan has nished, the unit will display the total number of
stations have been found and a list of the found stations. All the stations
that have been found will be stored automatically.
To explore the found stations, press the
button to select a scanned
station, and then press the –VOLUME+/SELECT/SNOOZE dial to conrm.
If you want to remove all the previously scanned stations, system
reset is required.
24