AUX Operation
There are AUX IN socket located at the rear of the unit. Analogue audio
sound signals from other sources can be connected to the unit through
these sockets.
1. Connect to another audio device using the AUX IN socket via a RCA
stereo audio cable (not included).
2. While in the ON mode, press MODE button repeatedly to select
Auxiliary Input mode.
3. Turn the +/– VOLUME/SELECT dial to adjust the volume to your desired
level.
4. In Auxiliary Input mode, operate your audio device directly for
playback features.
Maintenance
Cleaning the Unit
Ensure the unit is fully unplugged from the mains socket before
cleaning.
• To clean the unit, wipe the case with a slightly moist, lint-free cloth.
• Do not use any cleaning uids containing alcohol, ammonia or
abrasives.
• Do not spray an aerosol at or near the unit.
Hints and Tips
If a problem occurs, it may often be due to something very minor. The
following table contains various tips:
Problem Solution
No power • Ensure the mains adapter cable is
connected securely.
• Make sure that the unit is switched on.
33
To Next Page
Loading...
Need help?
General
