Problem Solution
No Sound • Adjust the volume control, it may not be
turned up.
Static Sound • Signal reception is too low. Adjust the
aerial or move the unit to a stronger
signal location.
Sound is distorted • Volume is too high. Adjust the volume
control.
The unit does not
respond when pressing
any button
• The unit may freeze up during use.
Switch the unit off and then on again at
the mains socket to reset the unit.
Radio
Desired station not
found
• Weak signal. Use the Manual Tune
function.
No coverage in your
area or poor reception
• Adjust the position of the aerial.
The display is blank • This may occur if the broadcaster
changes the label of a service or removes
a label while tuned. The unit will try to
re-tune or perform a scan.
Bluetooth®
I cannot find
“SF-DABA18/
SF-DABG18” on my
Bluetooth® device
• Ensure the Bluetooth® function is
activated on your Bluetooth® device.
If any functional abnormality is encountered, unplug the unit
from the mains socket and reconnect it again.
34
To Next Page
Loading...
