Bluetooth® Operation
The unit has a Bluetooth® function that can receive a signal within 8 metres.
Pairing the unit with a Bluetooth® device to listen to music:
1. Press the MODE button repeatedly to select Bluetooth mode.
“Bluetooth ready” will show on display if the unit is not paired to any
Bluetooth® device. The system has entered paring mode.
2. Activate your Bluetooth® device and select the search mode.
3. “SF-DABA18/SF-DABG18” will appear on your Bluetooth® device.
4. Select “SF-DABA18/SF-DABG18” and enter “0000” for the password if
necessary.
• To pause/resume playback, press the –VOLUME+/SELECT/SNOOZE
dial.
• Turn the –VOLUME+/SELECT/SNOOZE dial clockwise/anti-
clockwise to increase/decrease volume.
• Press the
button to skip to the beginning of the current track or
to the previous track
• Press the
button to skip to the next track.
5. To disconnect the Bluetooth® function,
• Switch to another function on the unit;
• Disable the function from your Bluetooth® device;
• Press and hold the –VOLUME+/SELECT/SNOOZE dial.
• The operation range between the unit and the device is
approximately 8 metres.
• If the signal strength is weak, your Bluetooth® receiver may
disconnect, but it will re-enter pairing mode automatically.
• This unit supports A2DP (Advanced Audio Distribution
Prole) and AVRCP (Audio Video Remote Control Prole)
functions. This can only be paired with one Bluetooth device
at one time.
• Compatibility with all Bluetooth® devices is not guaranteed.
32
To Next Page
Loading...
Need help?
General
