Sandstrom SF-DABA18 - FM Radio Operation (Continued); Recalling FM Preset Stations; FM Display Modes

Recalling a Preset Station
Preset station 1-3
Press the Preset 1, 2 or 3 button
Preset station 1-10
1. Press and hold the INFO/MENU button, and then turn the –VOLUME+/
SELECT/SNOOZE dial or press the
button to select <Preset>.
Press the –VOLUME+/SELECT/SNOOZE dial to conrm.
2. Turn the –VOLUME+/SELECT/SNOOZE dial or press the
button
to select <Recall>. Press the –VOLUME+/SELECT/SNOOZE dial to
conrm.
3. Turn the –VOLUME+/SELECT/SNOOZE dial or press the
button
to select from Preset station 1 to 10 in Preset Store. Press the –
VOLUME+/SELECT/SNOOZE dial to conrm.
The stored stations will be saved into the memory and power
o will not erase it. Storing a new station in a preset location will
erase the previously stored station in that location.
FM Display Modes
Every time you press the INFO/MENU button, the display will cycle through
the following display modes.
Radio Text
This shows the information about the current programme.
Programme Type
This describes the “Style” or “genre” of music that is being broadcast
e.g. “Rock” or “Classical”.
Frequency
The frequency of the present station will be displayed.
Audio Type
This display the audio type is mono.
Power Source
This shows the power source (Mains Power or Battery) of the unit.
30