20
Non-Freesat Channels
In addition to freesat channels, the unit can be used to watch other free
channels, as long as they are broadcast from the same satellites as freesat.
To view non-freesat channels this option must be enabled in the main
menu.
Tuning in Non-freesat Channels
Refer to the illustration on the right:
1. Press the MENU button on the Remote Control to enter the main menu.
2. Select Settings and press OK to Confirm.
3. Press the buttons to select Other in the section bar.
4. Press the buttons to select Show Non-freesat Channels. Press the
Press the buttons to enable the option.
5. Press the buttons to select Add Non-freesat Channels. Press the OK
button to confirm.
6. Enter the frequency and symbol rate of the transponder to scan, using
the 0-9 buttons, and its polarization by using the buttons. You can
move between the three items using the buttons. When you have
entered the tuning information, press the BLUE button to start the
scan.
7. The unit will take a few moments to complete the scan. While it is
scanning, the unit displays the number of TV and radio channels found
so far. When it is finished, the unit will display a list of all the channels
found.
8. You can choose to watch a non-freesat channel from this list by moving
the orange bar using the buttons to highlight the channel you want
and pressing the OK button, or return to watching TV by pressing the
BACK button or the EXIT button.
To Next Page
Loading...
Need help?
General