Sandstrom SHDFSAT12 User Manual

31
Other Settings
1. Enter the Settings menu.
2. Press the buttons to select Other in the section bar. Press OK.
Showing Non Freesat Channels
1. Press the buttons to select Show Non freesat Channels. Press OK.
2. Press the BACK button or the EXIT button to exit the main menu.
Adding Non Freesat Channels
1. Press the buttons to select Add Non Freesat Channels.
2. Press the OK button to tune the Non-freesat Channels. Press the
BACK button or the EXIT button to exit the main menu.
Auto Standby
To conserve power, the unit by default will switch to standby after three
hours if no buttons are pressed on the unit or the remote control. To alter
this setting:
1. Press the buttons to select Auto Standby.
2. Press the buttons to select Enabled/Disabled. Press OK ‘to
confirm.
3. Press the BACK button or the EXIT button to exit the main menu.
Power Save in Standby Mode
1. Press the buttons to select Power Save in Standby Mode.
2. Press the buttons to select the enable or disable and then press
the OK button to confirm.
3. Press the BACK button or the EXIT button to exit the main menu.
Upgrade software
1. Press the buttons to select Upgrade software.
2. Press the buttons to select Automatic or Manual and then press
the OK button to confirm.
3. Press the BACK button or the EXIT button to exit the main menu.
First Time Installation
1. Press the buttons to select First Time Installation.
2. Press the OK button to revert all the unit settings to what they were
when you first got your unit and to start the First Time Installation
procedure.
You must enter the Lock PIN (if this option has been set), and then
confirm in another menu to start the process because it will delete
all channels, favourite channels, favourite channel list names and
the unit configuration.
3. Press the BACK button or the EXIT button to exit the main menu.
Exit Menu
Select
EXIT
OK
Weds 8 Oct 8:22pmSettings
Display & Audio
Language
Parental Freesat + Other
Network
Power Save in Standby Mode
Upgrade Software
Add Non Freesat Channels
First Time Installation
Auto Standby
Show Non Freesat Channels
See the “Non-freesat Channels” section of this instruction manual for full details of how
you can add and watch Non-freesat Channels.
To start this procedure you must have previously conrmed in the Parental menu that
this procedure can take place.
This procedure deletes all channels and custom lists and reset the unit conguration.
To upgrade the unit manually, contact the UK Call Centre on 0844 561 1234 and
ask for further guidance.
SHDFSAT12_IB_V2.indd 31 13/06/2013 12:20

Sandstrom SHDFSAT12 Specifications

General

Brand	Sandstrom
Model	SHDFSAT12
Category	Receiver
Language	English