EasyManuals Logo

Sandstrom SHDFSAT12 User Manual

Sandstrom SHDFSAT12
36 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #3 background imageLoading...
Page #3 background image
2
Read all the instructions carefully before using the unit and
keep them for future reference.
Retain the manual. If you pass the unit onto a third party make
sure to include this manual.
Check that the voltage marked on the rating label matches
your adapter voltage.
Damage
Please inspect the unit for damage after unpacking.
Do not continue to operate the unit if you are in any doubt
about it working normally, or if it is damaged in any way -
switch o, withdraw the mains adapter and consult your
dealer.
Location of Unit
The unit must be placed on a at stable surface and should
not be subjected to vibrations.
Do not place the unit on sloped or unstable surfaces as the
unit may fall o or tip over.
The mains socket must be located near the unit and should
be easily accessible.
This unit is designed for indoor use only.
Temperature
Avoid extreme degrees of temperature, either hot or cold.
Place the unit well away from heat sources such as radiators
or gas/electric res.
Avoid exposure to direct sunlight and other sources of heat.
Naked Flames
Never place any type of candle or naked ame on the top of
or near the unit.
Moisture
To reduce the risk of re, electric shock or product damage,
do not expose this unit to rain, moisture, dripping or
splashing. No objects lled with liquids, such as vases,
should be placed on the unit.
If you spill any liquid into the unit, it can cause serious
damage. Switch it o at the mains immediately. Withdraw
the mains adapter and consult your dealer.
Ventilation
To prevent the risk of electric shock or re hazard due to
overheating, ensure that curtains and other materials do not
obstruct the ventilation vents.
Do not install or place this unit in a bookcase, built-in
cabinet or in another conned space. Ensure the unit is well
ventilated.
Safety
Always disconnect the unit from the mains supply before
connecting/disconnecting other devices or moving the unit.
Unplug the unit from the mains during a lightning storm.
Mains Adapter Cable
Make sure the unit or unit stand is not resting on top of
the mains cable, as the weight of the unit may damage the
mains cable and create a safety hazard.
If the mains cable is damaged it must be replaced by the
manufacturer, its service agent, or similarly qualied persons
in order to avoid a hazard.
Interference
Do not place the unit on or near appliances which may
cause electromagnetic interference. If you do, it may
adversely aect the operating performance of the unit, and
cause a distorted picture or sound.
Standby
The button on the remote control does not switch o the
unit completely. The unit will continue to draw electricity
from the mains supply while in standby. In the interests of
safety and to avoid unnecessary energy consumption, never
leave the unit in standby while unattended for long periods
of time, e.g. overnight, while on holiday or while out of the
house. Switch it o and disconnect the mains adapter from
the mains socket.
The means of disconnecting this unit from the mains is via
the mains adaptor which must be unobstructed and capable
of being disconnected from the mains supply at all times.
Batteries
Batteries used in the remote control for this unit are easily
swallowed by young children and this is dangerous.
Keep loose batteries away from young children and make
sure that the battery holder tray is secure in the remote
control. Seek medical advice if you believe a cell has been
swallowed.
Please dispose of batteries correctly by following the
guidance in this manual.
Supervision
Children should be supervised to ensure that they do not
play with the unit and the remote control.
Never let anyone especially children push anything into the
holes, slots or any other openings in the case - this could
result in a fatal electric shock.
The lightning ash with arrowhead symbol, within
an equilateral triangle, is intended to alert the user
to the presence of uninsulated dangerous voltage”
within the unit’s enclosure that may be of sucient
magnitude to constitute a risk of electric shock.
The exclamation point within an equilateral triangle
is intended to alert the user to the presence of
important operating and maintenance (servicing)
instructions in the manual accompanying the unit.
Service
To reduce the risk of electric shock, do not remove screws.
The unit does not contain any user-serviceable parts. Please
leave all maintenance work to qualied personnel.
Do not open any xed covers as this may expose dangerous
voltages.
Maintenance
Ensure to unplug the unit from the mains socket before
cleaning.
Do not use any type of abrasive pad or abrasive cleaning
solutions as these may damage the unit’s surface.
Do not use liquids to clean the unit.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Safety Warnings
SHDFSAT12_IB_V2.indd 2 13/06/2013 12:19

Table of Contents

Other manuals for Sandstrom SHDFSAT12

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Sandstrom SHDFSAT12 and is the answer not in the manual?

Sandstrom SHDFSAT12 Specifications

General IconGeneral
BrandSandstrom
ModelSHDFSAT12
CategoryReceiver
LanguageEnglish