Need help?Do you have a question about the Santec OTF-930 and is the answer not in the manual?
General| Brand | Santec |
|---|---|
| Model | OTF-930 |
| Category | Water Filtration Systems |
| Language | English |
Importance of keeping original packing materials for storage and transport.
Lists the items that should be supplied with the OTF-930 unit.
Details the available tuning ranges for the OTF-930.
Explains the automatic peak searching and selection of optical power.
Describes how optical power is monitored using a photodetector.
Explains the wavelength calibration feature and its adjustment limits.
Provides a detailed description of the front panel controls and indicators.
Details the connectors and features on the rear panel of the OTF-930.
Describes the ventilation slits and rubber feet on the bottom panel.
Instructions related to mains voltage connection and safety.
Guidelines for safe installation of the instrument.
Key safety precautions for operating the OTF-930 to prevent injury or damage.
Instructions for powering the OTF-930 unit on and off.
Procedure for connecting optical fibers to the input and output connectors.
Methods for entering and setting operational parameters.
Procedure for tuning and setting the desired wavelength.
How to activate and deactivate the filter bypass function.
Detailed explanation of the peak search function and its modes.
Procedure to set the shorter and longer scan ranges for peak search.
Instructions on how to initiate and cancel a peak search scan.
How to toggle the optical power display between mW and dBm.
Procedure for applying wavelength offset and recalibrating the unit.
How to permanently store wavelength offset and other parameter settings.
Steps to reset the OTF-930 to its original factory default settings.
Instructions for controlling the OTF-930 via the GPIB interface.
Instructions for controlling the OTF-930 via the RS-232C interface.
Lists and explains the control commands for GPIB and RS-232C communication.
Example Visual Basic program for GPIB communication to set wavelength and read power.
Example Visual Basic program for RS-232C communication to set wavelength and read power.
Precautions for handling, operation, and storage of the precision optical instrument.
Instructions for routine cleaning and maintenance of the OTF-930 unit.
Procedure for safely cleaning the optical connectors to prevent signal loss.
Procedure for replacing the fuse in the OTF-930 unit.
Recommendation for periodic inspection and calibration of the instrument.
Guidelines for properly packing the instrument for shipment.
Detailed visual instructions for packing the instrument and accessories.
Advice on handling the package during shipping to avoid shock and vibration.
To Next Page