EasyManua.ls Logo

Santec OTF-930 - Re-packing and shipping; Re-packing

Default Icon
52 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Optical Tunable Filter OTF-930
11-1
11
Re-packing and shipping
11.1. Re-packing
Please make sure that the original shipping box is used during the shipment, according to the
following instructions. If the original shipping box is misplaced or damaged, please contact our
customer service department. We can arrange for the shipping box to be sent to you.
Alternately, when the original shipping box is not available, send the instrument with a sturdy,
robust shipping box and at least 10cm packing material between the instrument and the
shipping box. The entire 10cm space on every side of the instrument should be lled with a
cushioning material.
Special attention for re-packing and shipping is required when you ship the instrument for
repair or to a remote location.
CAUTION
The packing materials we used are designed to protect the instrument from the shock
or vibration during the shipment. If the instrument is shipped without packing materials
or improperly packed, the instrument might not be able to maintain performance. Any
instrument damage that occurred when the instrument shipped without the original
shipping box or without proper packing, will not be applicable for warranty repair, even
at the guaranteed term.