Optical Tunable Filter OTF-930
10-3
10.4. Changing the Fuse
Before changing the fuse, always disconnect the power cord from the power outlet.
Use two surge resistant type fuses. T1.6A/250V(100~240V). Fuses are in the fuse box above the
power inlet on the rear panel. Pull out the fuse box, and replace with new fuses.
10.5. Inspection/Calibration
OTF-930 is warranted for a period of one year. Inspection and calibration on a regular basis (once
every 12 months) is recommended.Please contact our Sales Department concerning requests for
instrument inspection/calibration or consultation on other matters.
Main Voltage Fuse Rating
AC100~240V
T1.6A/250V
To Next Page
Loading...