Otherwise:
• Turn off the appliance (unplug the mains plug (7))
• At the rear of the appliance (fig. C), push the button (20) to reset the overcurrent
protector. If the button does not remain in the "reset" position, allow the appliance to
cool before renewing the operation.
If the problem persists, switch off the power (unplug the mains plug (7)) and call in
maintenance service or contact a Santos authorised dealer.
The dose of ground coffee is not even
• Check that there are coffee beans in the bean hopper. We recommend having at least
100 g of coffee beans in the hopper.
• Clean the ground coffee outlet conduit (13) (fig. A)
• Replace the anti-static tab (34)
The appliance runs without filling the portafilter
• Check that there are coffee beans in the bean hopper.
• Check that the bean hopper shutter (3) is in the open position.
• Clean the grinding body, tab and the coffee outlet conduit.
• Try to set a coarser grind
• Replace the burrs (27).
Espresso coffees tend to be increasingly lighter
• Check and adjust the grind setting then
• Check and adjust the timer settings. It is normal to adjust the duration of the timer with
the wear of the burrs or a change in the type of roasted coffee.
• Replace the burrs (27) if the timer times become excessive.
The appliance is not operating after a power failure
• The appliance is equipped with a "No voltage" safety. Restart the appliance by
pressing the On/Off button (12).
The appliance turns off automatically
• To reduce power consumption, the appliance has an adjustable standby system and
an automatic stop.
• Restart the appliance by pressing the On/Off button (12).
The burrs set replacement indicator remains visible
• Validate the replacing of the burrs set in the associated menu.
To Next Page
Loading...