"EC/EU" DECLARATION OF CONFORMITY
THE MANUFACTURER:
SANTOS SAS - 140-150, Av. Roger SALENGRO 69120 VAULX-EN-VELIN (LYON) - FRANCE
Declares that the appliance to be launched on the professional market, hereinafter:
Designation: Espresso coffee grinder
Type Number: 67
is in compliance:
• with the regulations defined by appendix 1 of the EU "Machinery" Directive No. 2006/42/EC
and with national implementing legislation.
• with the regulatory provisions of the following European directives and regulations:
o No. 2014/35/EU (Low Voltage Directive)
o No. 2014/30/EU (EMC Directive)
o No. 2014/65/EU (RoHS Directive)
o No. 2012/19/EU (WEEE Directive)
o No. 1935/2004/EC (Regulation) concerning materials and articles intended to come
into contact with foodstuffs
o No. 10/2011/EU (Regulation) concerning plastics intended for contact with
foodstuffs
Harmonised European standards used to give presumption of conformity with the essential
requirements of the directives mentioned above:
• NF EN ISO 12100:2010, Machine safety - General design principles
• NF EN 60204-1:2018, Machine safety – Electrical equipment of machines – General
requirements
• NF EN 1672-2:2020, Food products machinery - Fundamental concepts - Hygiene
requirements.
• NF EN 60335-1:2013, Safety of household electrical appliances and similar appliances
• NF EN 60335-2-64:2004, Particular requirements for commercial electric kitchen machines
Issued in VAULX-EN-VELIN on: 01/12/2023
Title of signatory: PRESIDENT AND CHIEF EXECUTIVE OFFICER
Name of signatory: Aurélien Fouquet
Signature:
To Next Page
Loading...