ELECTRICAL CONNECTION
The appliance can operate over a single-phase electrical power supply:
- 100-240 V 50/60 Hz
This appliance can operate in both 50 Hz and 60 Hz without any adjustment needed
Line protection: the appliance must be connected to a standard 2-pole + earth socket. The
installation must be equipped with an RCD and a fuse rated at 16A. The appliance must
be earthed.
Check that the power plug is always accessible regardless of the installation mode.
CAUTION!
• Before connecting the appliance, check that the mains voltage matches the voltage of
your appliance. Its value is indicated:
➢ either on the manufacturer's plate (6) under the appliance.
➢ or on the manufacturer's plate on the last page of this manual.
• If the power cable (7) is damaged, it must be replaced with a cord equipped with an IEC
C13 type connector.
1
st
USE
Correctly clean the parts in contact with the coffee (fig. A).
• Remove the cover (1), the bean hopper (2), the grounds collector (4) and wash them
with a standard household washing up liquid and non-abrasive sponge.
END-OF-LIFE PRODUCT RECYCLING
This appliance is marked with the symbol for the selective sorting of waste
electrical and electronic equipment. This means that the product must be
taken in hand by a selective collection system in accordance with Directive
2012/19/EU (WEEE) – Business appliances part – to be recycled or
dismantled in order to reduce environmental impact.
For more information, please contact your dealer or the SANTOS company.
For disposal or recycling of the components of the appliance, please contact
a specialised company or the SANTOS company
Electronic products that have not been selectively sorted are potentially hazardous to the
environment.
Packaging materials must be disposed of or recycled in accordance with the regulations in
force.
To Next Page
Loading...