USING THE APPLIANCE
PREAMBLE
Setting a dose is carried out in 3 steps:
1. Grind setting
2. Setting the speed of the motor
3. Setting the timer
See the chapter "Setting the appliance"
FIRST USE
Assembly and preparation
1. Position the grounds collector (4) in front of the appliance.
2. Place the bean hopper (2) on the adjustment nut of the grinding body (24).
3. Pour the roasted coffee beans into the bean hopper and place the cover on the
bean hopper.
4. Open the shutter of the bean hopper (3).
Setting the position of the fork
Unlock the retaining screw (16) of the adjustable fork (15).
Adjust the vertical position of the fork according to your portafilter
USE
Switching on
1. Turn on the appliance by pressing the On/Off button (12).
2. Use the Turn&Push button (11) or the selection buttons (10) to select the recipe.
3. Place the portafilter on the fork (15) and move the detection flap (18) to deliver the
dose of ground coffee.
4. Remove the portafilter.
To Next Page
Loading...