Santos 67 - Technical Specifications of the Appliance; Technical Specifications

SANTOS: Operating & Servicing Manual
98167 GB 1.0 - 01 2024 19 / 23 www.santos.fr
GB
TECHNICAL SPECIFICATIONS OF THE APPLIANCE
TECHNICAL SPECIFICATIONS
Model 67
67
Use:
Roasted coffee beans
Power voltage
(V)
100-240 ~
Frequency
(Hz)
50/60
Motor:
Absorbed power:
(W)
1010
Diameter of the burrs
(mm)
63.5
SANTOS burrs reference
00001B
Bean hopper capacity
(kg)
1.1
Number of recipes that can be configured
6
Grind setting range
Very fine to coarse
Flow (4)
(kg/h)
5 to 50
Intermittent operation (3)
10 seconds on and 20 seconds off
Dimensions: Height
(mm)
520
Width
(mm)
226
Depth
(mm)
362
Weight: Net weight
(kg)
11.5
Shipping weight
(kg)
13
Noise level: (2)
(dBA)
65
(1) These values are given for information only. The exact electrical characteristics of your appliance are
noted on its manufacturer’s plate.
(2) Noise level measured at sound pressure with appliance under load at 1 m from its axis according to EN
31201.
(3) Cycle 10sec ON / 20sec OFF:
This professional appliance is intended for intermittent use with a 10-second "on" and 20-second "off" cycle.
This cycle corresponds to the "on" time to perform the function and the "off" time for the preparation and
service of the processed products, in accordance with the requirements of the standard:
EN 60335-2-64+A1:2004 Part 2-64: Particular requirements for commercial electric kitchen machines.
(4) Flow: the flow depends on the type of beans used, the grind setting and the choice of the motor speed.