Safety
Safety, Operation and Maintenance Manual - Sep 2012 2-11
SY115C9/135C/155H Crawler Hydraulic Excavator
2.2.3.3 Safety decal locations
Sany cannot anticipate every possible circum-
stance that might involve a potential hazard.
The warnings in this manual and on the prod-
uct are, therefore, not all inclusive. If a tool,
procedure, work method or operating tech-
nique that is not specifi cally recommended by
Sany is used, you must be sure that it is safe
for you and for others.
Application or operation not specified in this
manual shall not be performed at any time.
The following safety decals are used on the
machine.
●
Be sure to recognize the correct locations
and information on the decals.
●
To ensure that the decals can be read
and understood easily, they have to be at-
tached to the right locations and always
kept clean. The use of organic solution or
gasoline to clean the decals is not allowed.
●
There are also other decals besides those
for warning and safety. These messages
should be treated in the same way.
●
A new decal should be used for replace-
ment if the old one is broken or missing,
or cannot be read. See the manual or the
message for part number of the decal. You
may order a new one from your Sany dis-
tributor.
To Next Page
Loading...
