EasyManua.ls Logo

SANY SY135C8 - Preparing the Machine

SANY SY135C8
445 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Safety
Safety, Operation and Maintenance Manual - Sep 20122-58
SY115C9/135C/155H Crawler Hydraulic Excavator
Locked
CZ335-1102075
2.5.3 Preparing the machine
Before maintaining the machine:
Park the machine on solid and at ground.
Lower the bucket to the ground.
Place blocks under the tracks to prevent
movement of the machine.
Turn the fuel control dial to rst gear. Run
the engine at low speed for 5 minutes.
Turn the start switch to OFF position and
stop the engine.
Turn the start switch to the ON position.
Operate the control levers 2 or 3 times in
all directions to relieve internal pressure of
the hydraulic system.
Remove the key from the switch.
Place the hydraulic lockout control to the
LOCK position.
CZ335-1102073
CZ335-1102074
Fig. 2-86
Fig. 2-87
Fig. 2-88

Table of Contents

Related product manuals