96 Section 2D: Controlling Your Roaming Experience
Using Call Guard
Your phone has two ways of alerting you when you are
roaming off the Nationwide Sprint PCS Network: the onscreen
roaming icon and Call Guard. Call Guard makes it easy to
manage your roaming charges by requiring an extra step
before you can place or answer a roaming call. (This additional
step is not required when you make or receive calls while on
the Nationwide Sprint PCS Network.)
To turn Call Guard on or off:
1. Select > Settings > Others > Roaming > Call Guard.
2. Highlight On or Off and press .
To place roaming calls with Call Guard on:
1. From standby mode, dial 1 + area code + the seven-digit
number and press .
2. Press to proceed while the pop-up message is
displayed.
– or –
Press any key to erase the pop-up message, and then
select
Options (right softkey) > Roam Call.
To answer incoming roaming calls with Call Guard on:
1. Press . (A message will be displayed notifying you
tha
t roaming char
ges will apply.)
2. Press to proceed while the pop-up message is
displayed.
– or –
Press any key to erase the pop-up message, and then
select
Options (right softkey) > Answer.
Note:
If the Call Guard feature is set to On, you need to take extra
steps to make and receive roaming calls.
To Next Page
Loading...
