Sanyo M1 (Sprint - Using Voice-Activated Dialing; Reviewing Voice Dial Tags; Erasing All Voice Dial Tags

136 Section 2H: Using Your Phone’s Voice Services
5. Respond to the prompt by repeating the name after the
beep. (The display shows “Voice Tag Recorded.”)
n
If you set a voice tag, the icon is shown next to
the phone number on the Contacts list.
Reviewing Voice Dial Tags
To review voice dial tags:
1. Display a Contacts entry.
2. Select a voice dial entry you want to review and press .
3. Highlight the desired voice dial entry and select Options
(right softkey) > Set Voice Tag.
4. To select an option, highlight it and press .
n
Play to play the selected voice dial tag.
n
Play:Speaker to play the tag in speakerphone mode.
n
Changeto change the recorded voice dial tag.
n
Erase to erase the voice dial tag. Select Yes to erase;
select No to cancel.
Erasing All Voice Dial Tags
To erase all voice dial tags:
1. Select > Settings > Security, and then enter your lock
code. (The Security menu is displayed.)
2. Select Erase/Reset > Erase Voice Tag.
3. Select OK (left softkey), and then select Yes to erase all
recorded voice dial tags; select
No to cancel.