Sanyo MCO-19M - Setting LCD Back Color and DAQ Parameters

- 38 -
㻌
㻌
<LCD back color>
When you input “1” in the right side of “LCD Back Color” column, the display back color is set in blue (Factory default).
When you input “2” in the right side of “LCD Back Color” column, the display back color is set in white.
Note) When you input a value except for 1 or 2, the display back color is automatically set in blue.
<DAQ communication speed>
DAQ communication speed is settable only when an optional MTR-480 is installed.
When you input “0” in the right side of “DAQ Speed”, DAQ communication speed is set in 2400 bps.
When you input “1” in the right side of “DAQ Speed”, DAQ communication speed is set in 4800 bps.
When you input “2” in the right side of “DAQ Speed”, DAQ communicaiton speed is set in 9600 bps.
Note) When you input a value except for 0 or 1 or 2, DAQ communication speed is automatically set in 9600bps.
<DAQ communication ID>
DAQ communication ID number is settable only when an optional MTR-480 is installed.
Settable range is 0~250. (Factory default: 0)
When you input “0” in the right side of “DAQ ID”, DAQ is not communicable.
Note) When you input a value over than “250”, DAQ communication ID number is set in “250”.
㻌
䣑 䣍
䣷 䣵䣕 䣶 䣣 䣶
䣖 䣱 䣱 䣮 䣵
䣎 䣱 䣩
䣕 䣧 䣶
䢷 䢰 䢲䢲䢵 䢹 䢰
䣗䣏 䣇 䣐
䣑 䢴䣖 䣧 䣯 䣲 䢵 䢹 䢰 䢲 䤑䣅 䣅 䣑 䢴 䢷 䢰 䢲 䢧
㻌
㻌
㻌
㻌
䣧䣖 䣫 䣯䣆 䣣 䣶 䣧
䣫 䣰 䣩䣕 䣧 䣶 䣶䣒 䣙䣎 䣱 䣥 䣭䣍 䣧 䣻
䣰 䣩䣧 䣶 䣶 䣫䣗 䣘 䣕
䣥 䣧 䣮䣅 䣣 䣰
䣫 䣰 䣩䣕 䣧 䣶 䣶䣆 䣃 䣓䣎 䣅 䣆 䢱
䣕 䣸 䣥
䣫 䣰 䣩䣕 䣧 䣶 䣶䣣 䣴 䣯
䣑
䣃 䣮
䣍
䣰䣣 䣶 䣫 䣱䣮 䣫 䣤 䣴䢴 䣅 䣣䣑 䢴 䢱 䣑䣯 䣲 䢱 䣅䣖 䣧
䣗䣏 䣇 䣐
䢫䢪 䢳 䢱 䢴
䣱 䣮 䣵䣶 䣖 䣱䣧 䣮 䣧 䣥䣕
㻌
㻌
㻌
㻌
䣎 䣅 䣆 䢱 䣆 䣃 䣓 䣕 䣧 䣶 䣶 䣫 䣰 䣩
䣎 䣅 䣆 䣄 䣣 䣥 䣭 䣅 䣱 䣮 䣱 䣴 䢳 䢪 䢳 䢰 䣄 䣮 䣷 䣧 䢴 䢰 䣙 䣪 䣫 䣶 䣧 䢫
䣆 䣃 䣓 䣕 䣲 䣧 䣧 䣦 䢲 䢪 䢲 䢰 䢴 䢶 䢲 䢲 䢴 䢰 䢻 䢸 䢲 䢲 䢫
䣆 䣃 䣓 䣋 䣆 䢲 䢪 䢲 䢰 䣑 䣈 䣈 䢳 䢯 䢴 䢷 䢲 䢫
䣆 䣃 䣓 䣏 䣱 䣦 䣧 䢲 䢪 䢲 䢰 䣎 䣱 䣥 䣣 䣮 䢳 䢰
䣔 䣧 䣯 䣱 䣶 䣧 䢫
䣔 䣧 䣯 䣱 䣶 䣧 䣃 䣮 䣣 䣴 䣯 䢳 䢪 䢲 䢰 䣑 䣈 䣈 䢳 䢰 䣃 䣥 䣶 䣫 䣸 䣧 䢫
㻌
㻌
㻌㻌