EasyManua.ls Logo

Sanyo PDG-DHT8000L - Page 145

Sanyo PDG-DHT8000L
242 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
-145-
Control Port Functions
IC Pin Name Pin No. Signal Name Function I/O Operation
U2 210 SLOT_G_PW G Input Slot I
U3 311 SLOT_B_PW B Input Slot I
V2 209 SLOT_R_PW R Input Slot I
Y1 98 COMP_HS_PW H Sync Input I
AA1 97 COMP_VS_PW V Sync Input I
AA2 206 VS_SLOT V SYnc Input Slot I
AA3 307 HS_SLOT H Sync Input Slot I
AA4 400 IN2_HS_PW H Sync Input 2 I
AA5 485 IN1_HS_PW V Sync Input 1 I
AB4 399 COMP_VS_PW V Sync Input I
AB5 484 IN1_VS_PW V Sync Input 2 I
AG11 387 R/C_SLOT Remote Control Input Slot I
AG12 386 RXD_PW Rxd I
AG17 381 PW_DCLK Clock Output O
AG18 380 PW_DHS H Sync Output O
AH11 292 R/C_PW Remote Control Input I
AH12 291 TXD_PW Txd O
AH18 295 PW_DVS V Sync Output O
AH21 282 WIND_SENS Wind Sensor Input I
AH22 281 KEY3 Key Control Input 3 I
AJ20 180 OPTION2 Option 2 I
AJ21 179 PRESS_SENS Pressure Sensor Input I
AJ22 178 KEY2 Key Control Input 2 I
AK20 69 OPTION1 Option 1 I
AK21 68 THERM Thermistor Input I
AK22 67 KEY1 Key Control Input 1 I
IC18 01
P1 2 POWER_LED LED Control O active:H
P2 3 FILTER_LED LED Control O active:H
P3 4 TEMP_LED LED Control O active:H
P4 5 READY_LED LED Control O active:H
P5 6 SHUTTER_LED LED Control O active:H
P6 7 LAMP_REP1_LED LED Control O active:H
P7 8 LAMP_REP2_LED LED Control O active:H
P8 9 LIGHT_ALL_LED LED Control O active:H
P11 91 SCLK_FRT FPGA Configration O active:H
P12 92 SDAT_FRT FPGA Configration O active:H
P13 93 DONE_FRT FPGA Configration I H
P14 94 INT_FRT FPGA Configration I H
P15 97 DC_ON Power On/Off O active:H
P16 98 FAN_SW_2 IO for Fan Control O active:H
P17 99 FAN_SW_1 IO for Fan Control O active:H
P18 100 LIGHT_POW_LED LED Control O active:H
P21 48 R/C_CTRL2 Switch for RC Input O
FRONT&TOP:H, TOP&BACK:L, FRONT&BACK:L, FRONT: H,
TOP:H, BACK:L, ALL:L
P22 49 PROG_B_FRT FPGA Configration O H
P23 50 DDP_SCL IIC for Formatter I/O
P24 51 DDP_SDA IIC for Formatter I/O
P25 52 R/C_CTRL1 Switch for RC Input O
FRONT&TOP:L, TOP& BACK:H, FRONT&BACK:L, FRONT:L,
TOP:H, BACK:H, ALL:L
P26 53 R/C_CTRL0 Switch for RC Input O
FRONT&TOP:L, TOP&BACK:L, FRONT&BACK: H, FRONT: H,
TOP:L, BACK:H, ALL:L
P27 54 USBB_VBUS USB O H: Connected, L: Disconnected
P28 55 USBB_D+ USB I/O
P31 72 TX_SLOT UART for Slot I/O
P32 73 RX_SLOT UART for Slot I/O
P33 74 XM_TXD UART for Slot I/O
P34 75 - Not used -

Table of Contents

Other manuals for Sanyo PDG-DHT8000L

Related product manuals