Sanyo PDG-DHT8000L - Computer Input; Computer System Selection

-35-
Mechanical Disassembly
11 R/C2 board and AC box assy removal
1 Remove 1 screw-A (T3x8) and take the R/C2 board off.
2 Remove 1 screw-B (T4x8) and 2 screws-C (M4x6) take the AC bracket and AC
shield off.
3 Remove 3 screws-D (T4x8) and take the AC box assy off.
R/C2 board
A
C
B
C
D
D
AC shield
AC bracket
(M4x6)x4
D
AC box assy
AC cord
holder
Fuse holder
Noise filter
SW901
AC socket
Wiring in AC box
(M3x6)x2
(M3x6)x2
Blue
Brown
Green
Fuse holder