Sanyo PLC-SW30 - Image Level Selection (Computer); Choosing Image Presets

27
Computer Input
Menu Operation
Press MENU button to display the On-Screen Menu. Press Point
7 8 button to move the red frame pointer to Image Select Menu
icon.
1
2
Press Point d button to move the red frame pointer to the level
that you want to set and then press SELECT button.
Move the red frame pointer to the
level and press SELECT button.
The level being selected.
IMAGE SELECT MENU
Normal picture adjustment preset on this projector.
Standard
Picture adjustment improved in reproduction of halftones. This
adjustment is suitable for providing better image in brighter place.
Real
User preset picture adjustment in Image Adjust Menu ( ☞ P28 ).
I
mage 1~4
Image Select
Menu icon
Direct Operation
Select image level among Standard, Real, Image 1, Image 2, Image 3
and Image 4 by pressing IMAGE button on the remote control.
IMAGE button
Standard
Real
Image 1
Image 2
Image 3
Image 4
Normal picture adjustment preset on this projector.
Picture adjustment improved in reproduction of halftones. This
adjustment is suitable for providing better image in brighter place.
User preset picture adjustment in Image Adjust Menu ( ☞ P28 ).
Standard
Real
Image 1~4
Image Level Selection