Sanyo PLC-SW30 User Manual

8
q Zoom Lever ( ☞ P20 )
w Infrared Remote Receiver (
☞ P11 )
e Focus Ring (
☞ P20 )
r Projection Lens (
☞ P43 )
t Lens Cover
y Air Intake Vent (
☞ P43 )
u Exhaust Vent
q Air Intake Vent ( ☞ P43 )
w Terminals and Connectors (
☞ P10, 15,16 )
e Power Cord Connector (
☞ P12 )
r Exhaust Vent
q Air Filters( ☞ P43 )
w Air Intake Vents (
☞ P43 )
e Adjustable Feet (
☞ P14 )
e
w
q
u
y
t
r
i
e
w
q
t
r
y
CAUTION
Hot air is exhausted from the exhaust vents.
When using or installing the projector, the follow-
ing precautions should be taken.
– Do not put any flammable objects near these
vents.
– Keep front grills at least 3’(1m) away from any
objects, especially heat-sensitive objects.
– Do not touch this area, especially screws and
metallic part. This area will become hot while
the projector is being used.
This projector detects internal temperature and
will automatically adjust the running speed of the
cooling fans.
Bottom
q
e
w
Back
Front
Overview
CAUTION
Hot air is exhausted from the exhaust vent. Do
not put heat-sensitive objects near this side.
i Speaker
t Air Intake Vent ( ☞ P43 )
y Top Controls and Indicators (
☞ P9 )
CAUTION
Hot air is exhausted from the exhaust vent. Do
not put heat-sensitive objects near this side.

Sanyo PLC-SW30 Specifications

General

Native aspect ratio	4:3
Projection distance	- m
Vertical scan range	50 - 100 Hz
Horizontal scan range	15 - 80 kHz
Projection technology	3LCD
Contrast ratio (typical)	300:1
Screen size compatibility	34 - 200 \
Projector native resolution	SVGA (800x600)
Keystone correction, horizontal	20 °
Lamp type	UHP
Lamp power	150 W
Light source type	Lamp
Service life of light source	2000 h
Service life of light source (economic mode)	2500 h
RMS rated power	0.8 W
Number of built-in speakers	1
Power source	AC
AC input voltage	100 - 240 V
Power consumption (standby)	- W
Power consumption (typical)	244 W
Power consumption (PowerSave)	169 W
Focus	Manual
Throw ratio	1.6 - 1.9:1
Focal length range	- mm
Aperture range (F-F)	1.6 - 1.8
HDCP	-
Noise level	- dB
Dot clock scanning frequency	100 MHz
Full HD	No
Analog signal format system	NTSC, NTSC 4.43, PAL, PAL M, PAL N, SECAM
Supported graphics resolutions	800 x 600 (SVGA)
USB connector type	USB Type-B
HDMI ports quantity	0
Serial interface type	RS-232
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Placement	Desktop
Product type	Standard throw projector
Product color	Black, White
Cables included	AC, VGA
Remote control type	IR

Weight and Dimensions

Depth	190 mm
Width	270 mm
Height	78 mm
Weight	2100 g