-28-
1 Turn the projector on by a state of without FPC cables.
2 Project all of lights on the screen.
3 Adjust the adjustment base of relay lens assy to make color uniformity in
white.
If the shading appears on the left or right of the screen as shown in Fig.3,
loosen 1 screw G by using a hex screwdriver, and adjust the slot H to make
color uniformity in white by using a slot screwdriver.
4 Tighten the screw G to fix the relay lens unit.
Relay lens (Out) adjustment
Optical Adjustments
White
G
H
Fig.3
Moving of Slot H
To Next Page
Loading...
