EasyManua.ls Logo

Sanyo PLC-XE40 Service Manual

Sanyo PLC-XE40
96 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Multimedia Projector
SERVICE MANUAL
PRODUCT CODE
1 122 349 00 (LK6A)
1 122 349 02 (LK6C)
1 122 379 02 (KK6A)
Original Version
REFERENCE NO. SM5110793-00
FILE NO.
Model No. PLC-XE40
U.S.A. Canada
Europe, U.K
Chassis No. LK6-XE4000
NOTE: Match the Chassis No. on the unit's back cover
with the Chassis No. in the Service Manual.
If the Original Version Service Manual
Chassis No. does not match the unit’s, addi
-
tional Service Literature is required. You must
refer to “Notices” to the Original Service Manual
prior to servicing the unit.
K
! RoHS
This product does not contain any hazardous sub-
stances prohibited by the RoHS Directive. (You will
find “RSF” mark near the rating plate on the RoHS
compliant product.)
! WARNING
You are requested to use RoHS compliant parts for
maintenance or repair.
You are requested to use lead-free solder.

Table of Contents

Other manuals for Sanyo PLC-XE40

Questions and Answers:

Sanyo PLC-XE40 Specifications

General IconGeneral
Brightness4000 ANSI Lumens
Resolution1024 x 768 (XGA)
Contrast Ratio2000:1
Lamp Life2000 hours (Normal Mode), 3000 hours (Eco Mode)
Display TechnologyLCD
Aspect Ratio4:3
Projection Size30 to 300 inches
Lamp TypeUHP
Input PortsS-Video, Composite Video
Output PortsAudio
Noise Level35 dB (standard)

Related product manuals