Sanyo PLC-XF60A Quick Reference Guide

-8-
Connecting to Video Equipment (Digital and Video)
INPUT 3
VIDEO/Y Cb/Pb Cr/Pr
S-VIDEO
Cables used for connection
q Video Cable
w S-Video Cable
e DVI-D Cable
✽ Cables are not supplied with the projector.
VIDEO
wq
S-Video Output
e
DIGITAL (DVI-D)
Digital Output
(HDCP compatible)
Video Output
S–VIDEO
Connecting to Video Equipment (Component and RGB Scart)
INPUT 3
VIDEO/Y Cb/Pb Cr/Pr
Cables used for connection
q BNC Cable
w Scart-VGA Cable
e Component Cable
✽ Cables are not supplied with the projector.
RGB Scart
21-pin Output
w
q
Component Video
Output
(Y, Pb/Cb, Pr/Cr)
Component
Video Output
(Y, Pb/Cb, Pr/Cr)
ANALOG INY Cb/Pb Cr/Pr
Y Cb/Pb Cr/Pr
e
Note:
Unplug the power cords of both the projector and external
equipment from the AC outlet before connecting the cables.
Note:
Unplug the power cords of both the projector and external
equipment from the AC outlet before connecting the cables.

Sanyo PLC-XF60A Specifications

General

Vertical scan range	48 - 120 Hz
Horizontal scan range	15 - 120 kHz
Projection technology	LCD
Contrast ratio (typical)	1300:1
Projector native resolution	XGA (1024x768)
Keystone correction, vertical	40 °
Keystone correction, horizontal	30 °
Aspect ratio	4:3
Compatibility	UXGA/SXGA/XGA/SVGA/VGA/Mac
Dimensions (WxDxH)	518 x 252 x 606 mm
Power requirements	AC 100-240 V, 50/60 Hz
Lamp type	UHP
Lamp power	300 W
Light source type	Lamp
Noise level	39 dB
Dot clock scanning frequency	230 MHz
Microphone in	Yes
S-Video inputs quantity	1
Power consumption (typical)	900 W
Operating temperature (T-T)	5 - 35 °C

Weight and Dimensions

Weight	24000 g