Sanyo PLC-XK3010 - Menu Structure and Options

22
Basic Operation
Menu Bar
For detailed functions of each menu, see “Menu Tree” on pages 67-68.
Main Menu
Sub-Menu
③ 
Used to select an image mode from among , Standard, ,  ,
 and . (pp.32, 39)
④

For computer source, used to adjust computer image [Contrast, , , Color temp., 
, , , and Store ] (p.33).
For Video source, used to adjust picture image [Contrast, , Color, , , Color temp.,
, , , Noise reduction, Progressive, and Store ] (pp.40-
41).
② PC adjust
Select , , , , Vertical,  Clamp, 
H and  to adjust the parameters to match with the PC input signal format (pp.29-31).
⑤
Screen
For computer source, used to adjust size of the image [ Normal, Full, , , , Custom,
Custom adj.,  , , Ceiling, and] (pp.34-35).
For Video source, used to set size of image [Normal, Full, , , Custom, Custom adj.,
, Ceiling, and ] (pp.42-43).
① 
Used to select an input source from Computer 1, Computer 2 or Video (pp.27, 36-37).
⑥ Sound
Used to adjust the volume or mute the sound or set configurations to the MIC functions (p.24).
⑧ 
Display the input source information:  , , , Screen, Language, Lamp
status, Lamp counter , Power management, , , and
NO.. (p.57)
⑩ 
The key operation is displayed.
⑦
Setting
Used to set the projector’s operating configurations (pp.44-56).
⑨ Network
See owner’s manual of “Network Set-up and Operation”.
①
②
③
④
⑤
⑥
⑦
⑧
⑨
⑩