27
Choose either or by pressing the COMPUTER 1 or COMPUTER 2 button on
the remote control.
Before using these buttons, correct input source should be selected through Menu operation as described below.
1
2
3
When the Input Search function is set to
On 1 or On 2 in the Auto setup function, the
input signal will be searched automatically
(p.45).
Computer
1
Press the MENU button to display the On-Screen
Computer 1.
When Computer 1 is selected, press the Point
to access the submenu items. Use the
and then press the SELECT button.
Direct Operation
Menu Operation
Computer 2
and then press the SELECT button.
To Next Page
Loading...
